This is box title Product Configurator Welkom bij de productconfigurator van Transvend. Voer de volgende stappen uit om uw perfecte waterverhitter samen te stellen. This is box title Creëer uw waterverhitter This is box title Specification code: / / / / / Welcome Welcome To help you select the correct Transvend water heater for your requirements we've created this configurator. It'll guide you through all of the different choices available to create a 'specification code'. Transvend use this specification code as a reference, enabling us to provide you with a quote for your water heater. Please complete each step by clicking 'next'. Power What voltage, current & power would you like your water heater to operate on? A (30A ‐ 350W, 12vdc only) B (60A ‐ 700W, 12vdc only) C (30A ‐ 700W, 24vdc only) Model Which capacity water heater would best suit your requirements? Please be aware of the size of each water heater and the fitting space available. 2 Litre water heater 2 – 6 persons • Full Details 3 Litre water heater 4 – 8 persons • Full Details 4 Litre water heater 6 – 10 persons • Full Details Options These options allow the customer to specify whether they want 4 different feature modes activated. *If all feature modes are disabled then the water heater will heat to 93°C, then keep the water at that temperature. Frost Protection Mode ‐ FP more details If active, FP mode will work when the water heater is both off and on. FP mode will only work if the supply voltage is above 12.5vdc (12vdc model) or 24.4vdc (24vdc model) When the temperature of the water is below 3°C then FP mode initiates. This pulses a small amount of the current to the element, stopping the water from freezing. When the temperature of the water is above 3°C the FP mode terminates. Voltage Sensing Mode ‐ VS more details VS mode will only work when the water heater is switched on. VS mode will only allow the water heater to work when the supply voltage is above 12.5vdc (12vdc model) or 24.4vdc (24vdc model). If the supply voltage is below 12.5vdc (12vdc model) or 24.4vdc (24vdc model) then the water heater will not work until the supply voltage has increased to 12.5vdc (12vdc model) or 24.4vdc (24vdc model). *This mode is recommended for standard battery protection* Alternator Sensing Mode ‐ AS more details If both VS mode & AS mode are switched on then AS mode will over‐ride VS mode. AS mode will only allow the water heater to work when the supply voltage is above 13.2vdc (12vdc model) or 24.8vdc (24vdc model). If the supply voltage is below 13.2vdc (12vdc model) or 24.8vdc (24vdc model) the water heater will not work until the supply voltage has increased to 13.2vdc (12vdc model) or 24.8vdc (24vdc model). *This mode is recommended if the water heater is connected directly to the vehicles main battery* Press To Heat Mode ‐ PH more details PH mode will only allow once only heating cycles. Once the water heater has reached 93°C, the green Ready LED will illuminate. The green Ready LED will continue stay on as the water heater cools by 5°C. When the water temperature has reached 88°C the water heater will switch itself off. To activate another heat cycle the user will have to turn the water heater on again. Colour Please select which colour you'd like? R Red W White B Blue G Grey Tap cover Please select whether you'd like a tap cover fitted to your water. The tap cover provides protection for the tap from impact, contamination and accidental activation. Tap cover fitted Get a Quote Please fill in your details so that we can provide you with a quote.